FIT 바이크사의 Shiv V3 포크입고
빠른 반응을 추구하는 라이더에게 추천
2년동안 개발 및 테스트 후 출시
100% 4Q Baked 열처리 크로몰리
포크하단내부 보강, 1PC 크로몰리 스티어링
인터그레이티드 전용 헤드셋만 장착가능
오프셋 : 25mm
무게 : 1,020g
FIT Shiv V3 Fork
Our goal was to design and produce an extremely strong fork with plenty of tire clearance.
After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset.
Here are a few features that make these forks so strong.
Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>
Post weld 4Q Baked heat-treatment
Legs : Seamless Swaged (No Welded Cap)
Dropouts : Investment Cast
Steerer Tube : 1 Piece CNC-Machined 4130 CrMo
Steerer Tube Length : 166mm
Compression : M24 X 1.5 Thread – 6mm Allen Slot
Axle to Crown : 320mm
Offset : 25mm
Weight : 2.25 lb (1.02 kg)
Heat Treat : 4Q Baked Post-Weld
SPECS >
Legs Double Butted, Tapered 4130 CrMo
Dropouts Laser Cut 3/8″ Slot
Steerer Tube 1 Piece CNC-Machined 4130 CrMo
Steerer Tube Length 162mm
Compression M10 X 1.25 Thread ? 6mm Allen Slot
Axle to Crown 320mm
Offset 1″ (25mm)
Weight 2.21 lb (1.0 kg)
Heat Treat 4Q Baked Post-Weld